铜川电瓷-静电除尘器用瓷绝缘子专家

 

 

铜川铁塔电瓷瓶厂,承压绝缘子,瓷绝缘子7231,振打瓷转轴,95磁转轴,绝缘瓷磁套,95瓷转轴,绝缘瓷套筒,高分子95瓷振打棒,锥形绝缘轴T501-2,电除雾石英管,电除尘石英管,陶瓷重锤,石英穿墙套管,石英盖板,锥形石英管,铜川电瓷厂电除尘工业电瓷,承重瓷瓶,95瓷穿墙套管,95瓷拉杆,瓷轴,95瓷套筒,95瓷支柱,高压瓷缸,电除雾石英管,电除尘石英管,电晕丝线,电瓷转轴,电瓷套筒,石英盖板,阴极悬挂瓷瓶,绝缘体6Y4SS1,绝缘瓷瓶H700-90KV,阴极吊挂瓷瓶,高压瓷瓶,阴极振打瓷转轴,湿式电除尘95瓷防露防腐型绝缘拉棒杆JFL-072/100D,JLG620-650,JF66-650-J,限位开关A1011,压力开关A39855,电除尘瓷轴万向节联轴器万向轴

铜川电瓷瓶厂铜川特种陶瓷制造电磁材料永远纯净铁塔电瓷有限责任公司95瓷套,瓷轴,承压绝缘子,高压瓷缸,阴极电磁支撑绝缘瓷瓶7231

铁塔电瓷

13571577004

Iron Tower Electric Porcelain Manufacturing Co., Ltd

TIETA

®

    • 服务热线 Service hotline

    • 0086 13571577004
    • 服务时间

    • 周一至周五 9:00-18:00
    • 微信咨询 WeChat consultation

Expert in ceramic insulators for electrostatic precipitators

铜川电瓷tieta牌铁塔电瓷湿电除尘承压绝缘子T515瓷转轴,绝缘瓷套,石英管,绝缘拉棒,瓷拉杆,高分子绝缘轴,支撑承重高压瓷瓶

95瓷塔式承重瓷瓶,95瓷侧拉轴L=515,湿电绝缘拉杆JLG620-650/36V陶瓷+铁,95瓷防露防腐型绝缘拉棒JFL-072-100D Ⅵ型-2F,95瓷拉杆,95瓷轴,锥形绝缘轴WBT4.0-4,高分子95瓷顶部振打棒绝缘轴T501-1,70-520,JZ3-520,电除尘绝缘瓷套,双耳型95瓷轴L=630mm,高压瓷瓶,瓷套管,瓷绝缘子7231,铜川电瓷厂,振打瓷瓶QE-1151电晕线

 

95瓷塔式承重瓷瓶

静电除尘器瓷柱用于静电除尘器支撑悬挂电晕极悬挂框架,起支撑和高压绝缘作用,瓷柱绝缘子适用于工作温度不超过500℃、直流工作电压72KV~120KV,安装地点海拔高度不超过1000米的工作条件下使用。

 

瓷柱绝缘子严格按照GB/T772-2005《高压绝缘子瓷件技术条件》和JB/T6746.3-93《电除尘器用瓷绝缘子》制造。绝缘子由瓷件和上下金属附近用耐高温胶合剂胶装而成,瓷件端面与金属附近胶装接触部分垫有耐高温弹性衬垫,瓷件胶装部位采用滚花,上砂等结构,防止松动,扭转,以保证机械强度。瓷件表面施白釉或无釉,金属表面涂高温油漆。

 

使用各种瓷瓶绝缘子产品时必须安装平整受力均匀,运行设备前先给瓷瓶及安装位置加热烘干12-24小时左右(保证瓷瓶及安装位置清洁干燥,不能有油污等潮湿现象,检查电压是否符合要求)才能运行设备),突然升温降温会导致温差引起瓷瓶炸裂。

 

Electrostatic precipitator porcelain columns are used for electrostatic precipitator support and suspension of corona electrode suspension frames, serving as support and high-voltage insulation. Porcelain column insulators are suitable for use under working conditions where the working temperature does not exceed 500 ℃, the DC working voltage is 72KV to 120KV, and the installation site is located at an altitude of not more than 1000m.
Porcelain post insulators are manufactured in strict accordance with GB/T772-2005 "Technical Conditions for High Voltage Insulators and Porcelain Insulators for Electrostatic Precipitators" (JB/T6746.3-93). Insulators are made of porcelain pieces and the vicinity of the upper and lower metal using high-temperature resistant adhesive. The contact part between the end face of the porcelain piece and the vicinity of the metal is padded with high-temperature resistant elastic pads. The bonding part of the porcelain piece adopts knurled, sanded, and other structures to prevent loosening and twisting to ensure mechanical strength. The surface of porcelain parts shall be painted with white glaze or unglazed, and the metal surface shall be painted with high-temperature paint.
When using various porcelain insulator products, it is necessary to install them smoothly and evenly under uniform stress. Before operating the equipment, heat and dry the porcelain bottle and installation location for about 12-24 hours (ensure that the porcelain bottle and installation location are clean and dry, free of moisture such as oil stains, and check whether the voltage meets the requirements) before operating the equipment. Sudden temperature rise and drop can cause the porcelain bottle to explode due to temperature differences.

 

塔式瓷柱(直流电压72-150KV)可按需方尺寸定制Tower type porcelain column (DC voltage 72-150KV)Can be customized according to the size of the buyer

 

TK-312/JW YP,TK-382/JW YP,TKC-382/JW YP,TK-492/JW YP,#TK1-570/JW YP


95瓷塔式承重瓷瓶,95瓷侧拉轴L=515,湿电绝缘拉杆JLG620-650/36V陶瓷+铁,95瓷防露防腐型绝缘拉棒JFL-072-100D Ⅵ型-2F,95瓷拉杆,95瓷轴,锥形绝缘轴WBT4.0-4,高分子95瓷顶部振打棒绝缘轴T501-1,70-520,JZ3-520,电除尘绝缘瓷套,双耳型95瓷轴L=630mm,高压瓷瓶,瓷套管,瓷绝缘子7231,铜川电瓷,振打瓷瓶QE-1151,直流72KV耐温≤500℃铜川电瓷厂铁塔电瓷牌静电除焦县丝φ2.3mm 316L电极丝电晕线电晕丝电极丝XT-316L静电除焦塔,阴极吊挂瓷瓶YQ20121高压静电捕焦油器FW/HL-8