铜川电瓷-静电除尘器用瓷绝缘子专家

 

 

铜川铁塔电瓷瓶厂,承压绝缘子,瓷绝缘子7231,振打瓷转轴,95磁转轴,绝缘瓷磁套,95瓷转轴,绝缘瓷套筒,高分子95瓷振打棒,锥形绝缘轴T501-2,电除雾石英管,电除尘石英管,陶瓷重锤,石英穿墙套管,石英盖板,锥形石英管,铜川电瓷厂电除尘工业电瓷,承重瓷瓶,95瓷穿墙套管,95瓷拉杆,瓷轴,95瓷套筒,95瓷支柱,高压瓷缸,电除雾石英管,电除尘石英管,电晕丝线,电瓷转轴,电瓷套筒,石英盖板,阴极悬挂瓷瓶,绝缘体6Y4SS1,绝缘瓷瓶H700-90KV,阴极吊挂瓷瓶,高压瓷瓶,阴极振打瓷转轴,湿式电除尘95瓷防露防腐型绝缘拉棒杆JFL-072/100D,JLG620-650,JF66-650-J,限位开关A1011,压力开关A39855,电除尘瓷轴万向节联轴器万向轴

铜川电瓷瓶厂铜川特种陶瓷制造电磁材料永远纯净铁塔电瓷有限责任公司95瓷套,瓷轴,承压绝缘子,高压瓷缸,阴极电磁支撑绝缘瓷瓶7231

铁塔电瓷

13571577004

Iron Tower Electric Porcelain Manufacturing Co., Ltd

TIETA

®

    • 服务热线 Service hotline

    • 0086 13571577004
    • 服务时间

    • 周一至周五 9:00-18:00
    • 微信咨询 WeChat consultation

Expert in ceramic insulators for electrostatic precipitators

铜川电瓷tieta牌铁塔电瓷湿电除尘承压绝缘子T515瓷转轴,绝缘瓷套,石英管,绝缘拉棒,瓷拉杆,高分子绝缘轴,支撑承重高压瓷瓶

50瓷横拉绝缘子(绝缘拉棒,绝缘拉杆)阴极吊挂瓷瓶/悬挂瓷瓶湿电绝缘拉杆JLG620-650/36V绝缘软套管1200X260mm,陶瓷绝缘套管390X615mm,100kV

 

50瓷横拉绝缘子(绝缘拉棒,绝缘拉杆)阴极吊挂瓷瓶/悬挂瓷瓶

静电除尘器用拉力瓷绝缘子用于电晕极框架和静电除尘器壳体之间的连接与绝缘。静电除尘器拉力瓷绝缘子,严格按照GB772-87《高压电瓷瓷件技术条件》制造。适用于工作温度不超过250℃、直流工作电压72-90kV,安装地点海拔高度不超过1000米的工作环境。抗拉破坏负荷不低于15kN。根据其结构分组合式和纯瓷式俩种,组合式拉绝缘子是由瓷件和金属附件用高温胶合剂胶装而成。瓷件端部采用滚花或上砂结构,瓷件和金属附件之间加衬耐高温高的弹性垫,并涂有缓冲层,防止松动和拉脱,以保证其机械强度。瓷件表面施白釉,金属表面涂防锈漆。

注:不同材质等级的瓷件耐温≤250℃、环境中使用,工作电压为72-100KV

 

使用各种瓷瓶绝缘子产品时必须安装平整受力均匀,运行设备前先给瓷瓶及安装位置加热烘干12-24小时左右(保证瓷瓶及安装位置清洁干燥,不能有油污等潮湿现象,检查电压是否符合要求)才能运行设备),突然升温降温会导致温差引起瓷瓶炸裂。

 

Tension porcelain insulators for electrostatic precipitators are used for the connection and insulation between the corona electrode frame and the electrostatic precipitator housing. The tensile porcelain insulator of electrostatic precipitator is manufactured in strict accordance with GB772-87 "Technical Conditions for High Voltage Electrical Porcelain". Suitable for working environments where the working temperature does not exceed 250 ℃, the DC working voltage is 72-90kV, and the altitude of the installation site does not exceed 1000m. The tensile failure load shall not be less than 15kN. According to its structure, there are two types of composite and pure porcelain insulators. Composite tension insulators are made of porcelain and metal accessories bonded with high-temperature adhesive. The end of the porcelain piece adopts a knurled or sanded structure, and an elastic pad with high temperature resistance is lined between the porcelain piece and metal accessories, and a buffer layer is coated to prevent loosening and pulling off, to ensure its mechanical strength. The surface of porcelain parts shall be coated with white glaze, and the metal surface shall be coated with antirust paint. Note: Porcelain parts of different material grades have a temperature resistance of ≤ 250 ℃ and are used in environments with a working voltage of 72-100KV When using various porcelain insulator products, it is necessary to install them smoothly and evenly under uniform stress. Before operating the equipment, heat and dry the porcelain bottle and installation location for about 12-24 hours (ensure that the porc

 

横拉绝缘子(直流电压72-80KV)可按需方尺寸定制 Pull the insulator horizontally (DC voltage 72-80KV) Can be customized according to the size of the buyer

 

T35-812 YP, T36-822 YP, #T37-283 YP, #T37-700 YP, #T37-P70 YP

湿式电除尘瓷拉杆7282,瓷拉棒7282,瓷拉杆7281,瓷拉棒7281,侧部支撑拉杆,绝缘软套管1200X260mm,陶瓷绝缘套管390X615mm,100kV