静电除尘器用瓷绝缘子专家

 

 

振打瓷转轴95磁转轴绝缘瓷磁套95瓷转轴绝缘瓷套筒95瓷振打棒锥形绝缘轴T501-2高分子振打棒电除雾石英管电除尘石英管陶瓷重锤石英穿墙套管石英盖板锥形石英管电除尘工业电瓷承重瓷瓶95瓷穿墙套管95瓷拉杆石英瓷限位开关A1011压力开关A39855瓷转轴95瓷套筒95瓷支柱95瓷振打棒锥形绝缘轴承压绝缘子宣化电瓷高压瓷缸电除雾石英管电除尘锥形石英管电晕丝线陶瓷重锤电瓷转轴电瓷套筒振打瓷轴石英穿墙套管铜川电瓷厂铁塔电瓷绝缘子阴极悬挂瓷瓶阴极吊挂瓷瓶电除尘高压瓷瓶阴极振打瓷转轴振打瓷轴湿式电除尘95瓷防露防腐型绝缘拉棒杆JFL-072/100DJLG620-650JF66-650-J

铜川电瓷电磁材料永远纯净铁塔电瓷制造有限责任公司 

(铜川铜川瓷瓶特种陶瓷制造商)铁塔电磁制造有限责任公司铜川瓷套铜川瓷转轴铜川承压绝缘子铜川电瓷厂家

铁塔电瓷

13571577004

Iron Tower Electric Porcelain Manufacturing Co., Ltd

TIETA

®

    • 服务热线 Service hotline

    • 0086 13571577004
    • 服务时间

    • 周一至周五 9:00-18:00
    • 微信咨询 WeChat consultation

Expert in ceramic insulators for electrostatic precipitators

铜川电瓷tieta牌铁塔湿电除尘承压绝缘子瓷转轴绝缘瓷套石英管绝缘拉棒瓷拉杆绝缘轴支撑承重高压瓷瓶

50瓷穿墙套管瓷瓶绝缘子 耐温500℃材质95磁高压瓷瓶BQ-GYCP绝缘子H=700MT050

 

9550瓷穿墙套管瓷瓶绝缘子

静电除尘器穿墙绝缘子,用于静电除尘器电晕极母线穿过静电除尘器壳体的支撑和绝缘。穿墙绝缘子按结构分为组合式和纯瓷式,又可分为有伞和无伞俩种。
静电除尘器穿墙绝缘子严格按照GB/T772-2005《高压绝缘子瓷件 技术条件》和B/T6746。3-1993《静电除尘器用瓷绝缘子》制造。穿墙绝缘子适用于工作温度不超过250℃、直流工作电压72KV~100KV,安装地点海拔高度不超过1000米的工作条件下使用。
组合式穿墙绝缘子由瓷件和金属附件用耐高温胶合剂胶装而成,瓷件法兰部位采用滚花或上砂结构,瓷件与金属附件之间垫有缓冲层,防止松动。瓷件表面施白釉或棕油,金属表面涂防锈油漆。

 

注:不同瓷质等级的瓷件耐温≤250℃、≤350℃、≤500℃、≤700℃、环境中使用,工作电压为72-120KV。
使用各种瓷瓶绝缘子产品时必须安装平整受力均匀,运行设备前先给瓷瓶及安装位置加热烘干12-24小时左右(保证瓷瓶及安装位置清洁干燥,不能有油污等潮湿现象,检查电压是否符合要求)才能运行设备),突然升温降温会导致温差引起瓷瓶炸裂。

 

The electrostatic precipitator wall insulator is used for supporting and insulating the electrostatic precipitator corona electrode bus through the electrostatic precipitator housing. According to the structure, through-wall insulators can be divided into combination type and pure porcelain type, and can also be divided into two types: with umbrella and without umbrella.
The wall insulator of electrostatic precipitator shall strictly comply with GB/T772-2005 Technical Conditions for High Voltage Insulator Porcelain Parts and B/T6746. Manufacture of Porcelain Insulators for Electrostatic Precipitators (3-1993). The through-wall insulator is suitable for use under working conditions where the working temperature does not exceed 250 ℃, the DC working voltage is 72KV to 100KV, and the altitude of the installation site does not exceed 1000m.
The combined through-wall insulator is made of porcelain and metal accessories bonded with high-temperature resistant adhesive. The flange of the porcelain is of a knurled or sanded structure, and a buffer layer is placed between the porcelain and metal accessories to prevent loosening. The surface of porcelain parts shall be coated with white glaze or brown oil, and the metal surface shall be coated with antirust paint.
Note: Porcelain parts with different porcelain grades can withstand temperatures ≤ 250 ℃, ≤ 350 ℃, ≤ 500 ℃, ≤ 700 ℃, and be used in environments with a working voltage of 72-120 KV.
When using various porcelain insulator products, it is necessary to install them smoothly and evenly under uniform stress. Before operating the equipment, heat and dry the porcelain bottle and installation location for about 12-24 hours (ensure that the porcelain bottle and installation location are clean and dry, free of moisture such as oil stains, and check whether the voltage meets the requirements) before operating the equipment. Sudden temperature rise and drop can cause the porcelain bottle to explode due to temperature differences.

 

有伞/无伞穿墙管(直流电压72-130KV)可按需方尺寸定制
Wall penetrating tube with or without umbrella (DC voltage 72-130KV)
Can be customized according to the size of the buyer

 

T32-055 YP,T32-065 YP,T32A-065 YP,T24-7 YP,T24-135 YP,T32-145 YP,T32-155 YP,T32B-155 YP,T32-165 YP,T29-205 YP,T19-225 YP,T28-235 YP,T24C-7 YP,*T30-111 YP,*T20-051 YP,*T20-491 YP,T21-265 YP,T22-275 YP,T22-285 YP,T23-295 YP,T23-305 YP,T25-315 YP,T26-325 YP,T23-345 YP,T31-355 YP,T31-365 YP,*T33-031 YP,#T34-96 YP,#T32-1-80 YP

 

50瓷穿墙套管3124,穿墙套管3143,穿墙套管7523,穿墙套管7505,穿墙套管7506-A,穿墙套管ZDT.7,穿墙套管ZDT.7C,穿墙套管7520,穿墙套管YC137,穿墙瓷瓶3115,穿墙瓷瓶3117,穿墙瓷瓶3118,穿墙瓷瓶3146,穿墙瓷瓶ZD-247,穿墙瓷瓶3139,穿墙瓷瓶ZD247.C,穿墙瓷瓶3110,穿墙瓷瓶3111,